Multi-Unit Screw Retained Abutment Drill Guide

Intended Use

This drill guide facilitates the placement of the implants at the correct angulations which helps assure that the final position of the multi-unit abutment will be perpendicular to the patient’s jaw.

Characteristics

• Durable titanium construction
• Adjustable and foldable, allowing to be parallel to and follow the contour of the crestal bone.
• Sterilizable.

Step 1

Make a 2.0 pilot hole in order to place the guide pin.

Step 2

After placement of the guide pin into the drilled site, the angle and position of the guide band can be adjusted to be parallel to the crestal bone.

Step 3

The titanium band can be bent in order to follow the arch of the crestal bone.

Step 4

Three different angulations are indicated on the outside of the guide 0°, 17° and 30°. These angulations match the angulations of the different C-Tech multi-unit screw retained abutments.

• Step 5

Placement of the screw retained abutments.